The amount of material for the mesh

It's required to produce a mesh with predetermined length and width, roughly square meshes from tape with predetermined width. It is necessary to calculate the total length of the tape.

It's required to produce a mesh with a predetermined length, width and roughly square meshes from a tape with a predetermined width. It is necessary to calculate the total length of the tape.
For calculation, it's necessary to know the approximate size of a single mesh. The final size will be calculated so as to have a whole number of meshes by the width and length of the tape. The mesh size is defined and calculated from the center of one tape to the center of the other, i.e. mesh gap is smaller in length and width by the tape width.

PLANETCALC, Tape mesh

Tape mesh

The length of the mesh along the outer perimeter
The width of the mesh along the outer perimeter
Expected distance between the centers of two neighboring tapes
Digits after the decimal point: 2
Single mesh length
 
Single mesh width
 
Number of cross tapes
 
Number of longitudinal tapes
 
Tape total length
 

URL copiée dans le presse-papiers
PLANETCALC, The amount of material for the mesh

commentaires